|
|
 |
10GBase - CX4 Cables
With the lowest per-port cost of any rival 10-Gigabit Ethernet (10-GbE) interconnect technology, 10GBase-CX4 is quickly becoming the interface of choice for switches, routers, and high performance computer (HPC) clusters. Our CX4 cables are 100% built and tested by Amphenol Interconnect Products, the world's pre-eminent designer of high speed, high-bandwidth copper cable assemblies. |
|
|
 |
InfiniBand Cables
Amphenol InfiniBand cables are available in SDR 4X InfiniBand (10Gb/s) and DDR 4X InfiniBand (20Gb/s) versions for compatibility with a wide variety of switches, routers, HPC clusters, and HD video servers. Every Amphenol InfiniBand cable is 100% compliance tested before shipment and features Amphenol Spectra-Strip SKEWCLEAR wire and Fujitsu Micro-Giga CN SFF-8470 latch connectors. |
|
|
 |
Single-Mode 9-Micron Cables
Thanks to an inherently small 9.0-Micron core diameter, Single Mode Fiber (SMF) provides excellent headroom with minimal signal attenuation. Its near limitless bandwidth easily supports high speed communications standards such as Serial 10-Gigabit Ethernet. Amphenol 9/125 Single-Mode Fiber Optic patch cables feature machine polished ceramic ferrules in a variety of connector termini including FC, LC, MT-RJ, MU, SC, and ST. |
|
|
 |
Multimode 50-Micron Cables
50-Micron Multimode Fiber (MMF) is rapidly gaining in popularity due to its expanded bandwidth potential over traditional multimode fiber runs. Supporting nearly 3X the bandwidth over twice the distance, 50-Micron fiber is recommended for all new premise applications including intra-building connections. Amphenol 50/125 Multimode Fiber Optic patch cables feature machine polished ceramic ferrules in a variety of connector termini including FC, LC, MT-RJ, MU, SC, and ST. |
|
|
 |
Multimode 62.5-Micron Cables
62.5-Micron Multimode Fiber (MMF) has become the standard optical interface of choice for fiber-to-desktop applications, LAN backbones, campus networks, Gigabit Ethernet, media converters, and transceivers. Compatibility with both LED and laser based light sources ensures operation at 500m. Amphenol 62.5/125 Multimode Fiber Optic patch cables feature machine polished ceramic ferrules in a variety of connector termini including FC, LC, MT-RJ, MU, SC, and ST. |
|
|
 |
10-Gigabit Multimode Cables
Are you considering upgrading your network backbone to support 10-Gigabit Ethernet? Genuine Amphenol 50-Micron Laser Optimized Multimode Fiber patch cords offer scalable 10-Gig performance while offering backwards compatibility with legacy equipment. Specifically designed for use with VCSEL light sources, our 10GbE patch cables sport an impressive 2000/500 MHz/km bandwidth. Featuring machine polished ceramic ferrules in both LC and SC connector termini. |
|
|
 |
Mode Conditioning Cables
Genuine Amphenol Mode Conditioning Fiber Optic patch cables are specifically designed for use with long-wave (1300nm – 1000BASE-LX) Gigabit Ethernet applications. Many network installations include a combination of Single Mode and Multimode fiber, leading to problems with Differential Mode Delay (DMD). Mode Conditioning cables bridge the gap between the competing fiber types while fighting unwanted DMD. |
|
|
 |
SCSI - VHDCI Cables
Amphenol's VHDCI (Very High Density Cable Interconnect) SCSI cable designs have been selected as the interconnect of choice among the leaders in business computing. VHDCI SCSI cables by Amphenol feature stackable backshells and high performance low-skew wire construction. Ideal for the latest generation of Ultra160/Ultra320 (SCSI-5) compliant SCSI controllers and drives with blazing fast 320MB/s data transfer support. |
|
|
 |
SAS & Mini-SAS Cables
As an active member of the SAS (Serial Attached SCSI) and SATA Standards working groups, Amphenol has always been at the forefront of emerging interconnect technologies for demanding data storage applications. We always stock hard to find external 4x SAS (SFF-8470) and Mini-SAS (SFF-8088) cables in lengths up to 6m. Our internal SAS cable sets offer backwards compatibility with SATA-II standards. |
|
|
 |
Fibre Channel Cables
Amphenol Fibre Channel cables support transfer rates of up to 4.25 Gbps, while providing maximum durability and protection against EMI/RFI. Our innovative connector designs maximize performance with controlled impedence, cross talk, and skew characteristics as well as excellent EMI isolation properties. We stock all major cable types including HSSDB9, HSSDC, HSSDC2, & SFP versions in lengths up to 10m. |
|
|
 |
Category 5e (Cat5e) Cables
Genuine Amphenol brand Category 5E patch cables are rated to 350MHz for superb Gigabit Ethernet performance. We have one of the largest on-line inventories of Cat5e cables in the world, with a broad selection of standard UTP Cat5e patch cables, shielded Cat5e patch cables, Plenum Cat5e patch cables, and Cat5e crossover cables. |
|
Cat5e Patch Cables
|
Cat5e Shielded Patch Cables
|
Cat5e Plenum Patch Cables
|
Cat5e Crossover Cables
|
|
|
 |
Category 6 (Cat6) Cables
Genuine Amphenol brand Category 6 patch cables support bandwidth in excess of 500Mhz, providing excellent performance in Gigabit Ethernet applications. Installers estimate Cat6 cabling will have a lifespan of at least 20 years before it becomes obsolete due to its excellent headroom. All Amphenol Cat6 patch cables feature an integrated x-web to enhance pair separation and reduce cross-talk. |
|
|
 |
SFP Cables
Genuine Amphenol SFP cables offer an ultra-high performance, cost effective copper interface solution for gigabit speed applications in switched fabric I/O, switches, routers, data storage arrays, and high performance computer (HPC) clusters. All of our SFP cables feature Amphenol brand SFP connectors for the most reliable connection possible. |
|
|
 |
SFP Optical Modules
Amphenol Small Form Factor Pluggable (SFP) transceivers are designed for use in Fibre Channel and Gigabit Ethernet applications. Our optical transceiver modules are SFP Multi-Source Agreement (MSA), Fibre Channel FC-PI-2 400-M5/6-SN-I, and IEEE 802.3 Gigabit Ethernet compliant. Available in 2X (2Gb/s) and 4X (4Gb/s) configurations. |
|
|
 |
SFP+ Cables (Direct Attach)
The single channel SFP+ interface offers a far more compact profile than X2 and XFP and is fully scalable to 10-Gigabit data rates. Our SFP+ high speed copper cables are 100% built and tested by Amphenol Interconnect Products and provide an affordable low-power alternative to optical SFP+ systems. |
|
|
 |
SFP+ Optical Modules
Amphenol SFP+ optical transceiver modules combine 10-Gigabit data rates with low-power consumption (<1watt) in a low-profile package. Our SFP+ optical transceiver modules are 100% built and tested by Amphenol Interconnect Products and are offered in both standard and "Lite" versions depending upon your distance requirements. |
|
